Custom-made Poly Auger Wearshoes – 3/8″ thick UHMW (Note: custom flighting typically has a lead time of 1~2 weeks)
Ordering information:
- Measurement A: Flight Height – distance of the flight from shaft to edge.
NOTE: Flight height X 2 + center shaft diameter = flight diameter - Measurement B: Diameter of the center shaft.
- Measurement C: Pitch – space between flights. NOTE: when measuring pitch, be sure to keep the tape measure parallel with the center shaft.
- Left Hand or Right Hand turn
IMPORTANT:
***Please be accurate with your measurements because there is a no-return policy with custom-made orders.***
Wearshoes are sold per 1 pitch or rotation. Includes poly-capped bolts.
When selecting an auger diameter size, round up to the nearest whole size for auger diameter (i.e. have a 6.25″ diameter auger, must order 7″ size wearshoe).
Q. How worn can my steel auger be to still be able to use auger wearshoes?
A. You can have up to ¾” of the steel auger wore off on each side of the flighting (1 ½” off of the total diameter) and you are still good to install auger wearshoes.
Please watch our helpful video to learn how to order and install May Wes UHMW auger wearshoes:
-
Part no. 41322
10″ dia UHMW Wearshoe (Per pitch)
-
Part no. 41323
11″ dia UHMW Wearshoe (Per pitch)
-
Part no. 41324
12″ dia UHMW Wearshoe (Per pitch)
-
Part no. 41325
13″ dia UHMW Wearshoe (Per pitch)
-
Part no. 41326
14″ dia UHMW Wearshoe (Per pitch)
-
Part no. 41327
15″ dia UHMW Wearshoe (Per pitch)
-
Part no. 41328
16″ dia UHMW Wearshoe (Per pitch)
-
Part no. 41329
17″ dia UHMW Wearshoe (Per pitch)
-
Part no. 41330
18″ dia UHMW Wearshoe (Per pitch)
-
Part no. 41331
19″ dia UHMW Wearshoe (Per pitch)
-
Part no. 41332
20″ dia UHMW Wearshoe (Per pitch)
-
Part no. 41333
21″ dia UHMW Wearshoe (Per pitch)
-
Part no. 41334
22″ dia UHMW Wearshoe (Per pitch)
-
Part no. 41335
23″ dia UHMW Wearshoe (Per pitch)
-
Part no. 41336
24″ dia UHMW Wearshoe (Per pitch)
-
Part no. 41318
6″ dia UHMWWearshoe – No Countersunk Holes (Per pitch)
-
Part no. 41319
7″ dia UHMW Wearshoe (Per pitch)
-
Part no. 41320
8″ dia UHMW Wearshoe (Per pitch)
-
Part no. 41321
9″ dia UHMW Wearshoe (Per pitch)
Custom-made Poly Auger Wearshoes – 3/8″ thick UHMW (Note: custom flighting typically has a lead time of 1~2 weeks)
Ordering information:
- Measurement A: Flight Height – distance of the flight from shaft to edge.
NOTE: Flight height X 2 + center shaft diameter = flight diameter - Measurement B: Diameter of the center shaft.
- Measurement C: Pitch – space between flights. NOTE: when measuring pitch, be sure to keep the tape measure parallel with the center shaft.
- Left Hand or Right Hand turn
IMPORTANT:
***Please be accurate with your measurements because there is a no-return policy with custom-made orders.***
Wearshoes are sold per 1 pitch or rotation. Includes poly-capped bolts.
When selecting an auger diameter size, round up to the nearest whole size for auger diameter (i.e. have a 6.25″ diameter auger, must order 7″ size wearshoe).
Q. How worn can my steel auger be to still be able to use auger wearshoes?
A. You can have up to ¾” of the steel auger wore off on each side of the flighting (1 ½” off of the total diameter) and you are still good to install auger wearshoes.