Winter is right around the corner and heavy snows are forecasted in the Rockies next week! It’s time to order your May Wes UHMW poly cutting edge to avoid ugly damage to your expensive pavement.
Vertical cutting edge on a snowplow.
May Wes UHMW Poly Snow Blades are available for snowplows, snow pushers, box plows, and buckets. We custom cut and drill them to your specification right here in our Hutchinson, Minnesota, plastic fabrication shop. We offer UHMW poly blades in 4″, 6″ and 8″ widths and 3/4″, 1″ and 1 1/2″ thicknesses. We can make poly blades as long as 119″. Poly blades longer than 94″ will be seamed to save you on shipping, unless you request them not to be seamed.
How to Order Your UHMW Poly Snowplow Cutting Edge
Ordering poly cutting edges is easy. You can order them online, through your local May Wes dealer or give us a call at 1-800-788-6483.
We just need to get a couple of details from you:
- How long of a poly blade do you need?
- How wide of a poly blade do you need?
- How thick of a poly blade would you like? We recommend 3/4″ to 1″ for personal use and 1 1/2″ for commercial use. The thicker you go, the longer it will last.
- Is your snowplow a vertical plow like on a pickup truck, box plow or snow pusher, or is it a horizontal plow like on a tractor bucket? We bevel the cutting edges for horizontal applications and counterbore the holes.
- If you want us to drill the holes, we will need the measurement from the edge of the plow to the center of each hole
- We normally drill the holes down the center of the cutting edge so you can flip the cutting edge when one side wears down, unless you specify otherwise.
- Would you like to order poly blade hardware kits from us?
We can make your custom snowplow cutting edge and get it shipped out the door in just a couple of business days.
